Timer

The Timer will help you to keep track of when you have to go back to your car, as a drinking timer, or when you may be expecting someone to join you or pick you up.

Two modes are available, Parking Timer (Countdown mode) and Stop-Watch (Countup mode).

PARKING TIMER (COUNT DOWN MODE)

Reset to 0:00 before use (press "HR" and "MIN" buttons together). Use the "HR" and "MIN" buttons separately to set the desired parking time. Press the "START/STOP" button to start the Parking Timer. The remaining time will be shown on the LCD display. Upon reaching 0:00, the beeper alarm will sound for up to 60 seconds to alert you that the selected time period has expired, and the counter will then stop. The beeper alarm can also be stopped by pressing the "START/STOP" button, or by pressing the "HR" and "MIN" buttons together (you will hear a beep).

During the Countdown period, pressing the "START/STOP" button will pause the timer. Press the "START/STOP" button to re-start or pause the Timer. Pressing both the "HR" and "MIN" buttons together will both stop and reset the counter. During the Countdown period, a 2 second pre-warning signal will be heard at both the last 5 and 10 minutes of the countdown.

Whilst IMSMAAT is beeping (signalling the expiration of the selected time period), pressing the "START/STOP" button will again re-start the Countdown from the selected time limit. Pressing both "HR" and "MIN" together will stop and reset the counter and alarm.

This feature is very handy to avoid incurring a parking fee. Also use this feature as a drinking timer.

STOP-WATCH (COUNT UP MODE)

Reset to 0:00 before use (press "HR" and "MIN" buttons together). When the display reads zero, press the "START/STOP" button to start the Stop Watch from zero. The Stop Watch will count up to 20 minutes, and then will re-start counting from zero again to 20 minutes. The Stop Watch will cyclically count from 0 to 20 minutes until the "START/STOP" button is pressed, at which time the count will halt. Repeatedly press the START/STOP button to start or stop.

Pressing both "HR" and "MIN" together will both stop and reset the Stop Watch (you will hear a beep).

IMSMART, use IMSMAAT !